This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Iarve, E. V. Articles by Kim, R. Search for Related Content Social Bookmarking                         What's this?

Three-Dimensional Fracture Analysis and Experimental Investigation of Model Unidirectional Discontinuous Tow Composite Laminates

University of Dayton Research Institute, 300 College Park, Dayton OH, 45469-0168, USA

R. Kim

University of Dayton Research Institute, 300 College Park, Dayton OH, 45469-0168, USA

The purpose of this work is to perform analytical modeling and experimentally produce idealized composites reinforced with discontinuous fiber tows to evaluate the theoretical upper limits of tensile strength as compared to continuous fiber composites. The idealized composite represents a staggered mosaic of prepreg tape strips of equal width and length. Three-dimensional analysis was performed to evaluate the energy release rate of the possible damage accumulation modes, such as vertical splits and delaminations emanating from tape strip ends. Realistic estimates of the failure strain of the discontinued tow composites was obtained by comparing the calculated energy release rates to the critical Mode II energy release for axial cracking in the material system. The predicted failure strain as a function of the strip geometry was also in good correlation with the experimental results.

Journal of Thermoplastic Composite Materials, Vol. 15, No. 6, 469-476 (2002)
DOI: 10.1177/0892705702015006203


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?