Journal of Thermoplastic Composite Materials

 

Advanced Search

Journal Navigation

Journal Home

Subscriptions

Archive

Contact Us

Table of Contents

Click here for free access to the SAGE eReference platform!

Sign In to gain access to subscriptions and/or personal tools.
This Article
Right arrow Full Text (PDF)
Right arrow References
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Add to Saved Citations
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Request Reprints
Right arrow Add to My Marked Citations
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Chowdhury, S. R.
Right arrow Articles by Das, C. K.
Right arrow Search for Related Content
Social Bookmarking
Add to CiteULike   Add to Connotea   Add to Del.icio.us   Add to Digg   Add to Reddit   Add to Technorati  
What's this?
Journal of Thermoplastic Composite Materials, Vol. 13, No. 5, 400-416 (2000)
DOI: 10.1106/V6PP-X3D2-RGDK-FT7P

Shrinkability and Microstructural Properties of Composites Based on Low-Density Polyethylene (LDPE) and Polyurethane (PU) Rubber

S. Ray Chowdhury

J. K. Mishra

C. K. Das

Materials Science Centre, IIT, Kharagpur-721302, India

The heat shrinkability of polymers, which depends on their elastic memory, is being utilized in various applications, mainly in the field of encapsulation. The elastic memory can be introduced into the system by the addition of an elastomeric phase. From the technological point of view, low-density polyethylene (LDPE) is an important polymer. Polyurethane shows excellent properties in terms of solvent resistance, oil resistance, and abrasion resistance. Here the blends of low-density polyethylene (LDPE) and polyurethane (PU) were studied with reference to their shrinkability introducing crosslinking in both phases. Various microstructural parameters have been examined to determine their effect on shrinkability. Shrinkability decreases with increase in elastomer content and with increase in cure time in the case of blends of fixed ratio, for all blends. Generally, the crystallinity of a high-temperature (H-T) stretched sample is higher than that of low-temperature stretched samples, which is again higher than that of the original sample. From the continuous cure characteristics studied by Monsanto Rheometer, torque was found to increase with increase in elastomer content. From high-temperature DSC it is found that with increase in PU content stability increases, and further high temperature processing decreases the initial degradation temperature but enhances the rate of degradation.

Key Words: low-density polyethylene • polyurethane • shrinkability • curing, stretching • morphology • x-ray diffraction


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us   Add to Digg Digg   Add to Reddit Reddit   Add to Technorati Technorati    What's this?