Advanced Search

Journal Navigation

Journal Home

Subscriptions

Archive

Contact Us

Table of Contents

Sign In to gain access to subscriptions and/or personal tools.
Journal of Thermoplastic Composite Materials
This Article
Right arrow Full Text (OnlineFirst PDF)
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Add to Saved Citations
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Request Reprints
Right arrow Add to My Marked Citations
Citing Articles
Right arrow Citing Articles via Scopus
Google Scholar
Right arrow Articles by Ning, W.
Right arrow Articles by Jianming, F.
Social Bookmarking
Add to CiteULike   Add to Complore   Add to Connotea   Add to Del.icio.us   Add to Digg   Add to Reddit   Add to Technorati   Add to Twitter  
What's this?

Article

Effects of water on the properties of thermoplastic starch Poly (lactic acid) blend containing citric acid

Wang Ning*, Zhang Xingxiang, Han Na, and Fang Jianming

Tianjin Polytechnic University

* To whom correspondence should be addressed. E-mail: wang_n{at}yahoo.com.cn.


  Abstract

In order to improve the compatibility between hydrophilic starch granules and hydrophobic poly(lactic acid) (PLA), glycerol was used as plasticizer and citric acid (CA) was used as the additive to enhance the dispersion and the interfacial affinity in thermoplastic starch (TPS)/PLA blend. Water had been recognized as positive component for the properties of TPS, but it also could deteriorate the properties of PLA. So the influence of water on the properties of TPS/PLA blends was investigated through scanning electron microscopy (SEM), rheological thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR), Dynamic mechanical thermal analysis (DMTA) and tensile testing. In the presence of water and CA, the plasticization of starch in TPS/PLA blends could be improved dramatically. At the same time, a homogeneous TPS/PLA blends could be detected by SEM. But high CA and water content decreased the thermal stability of TPS/PLA blend as shown in TGA. In addition, FT-IR spectroscopy proved that CA and water could improve the interaction between TPS and PLA. The tensile testing showed that the maximum tensile strength of TPS/PLA blends could increase to 42 MPa higher than that of pure PLA. DMTA were also studied in this paper.

First published on June 19, 2009
Journal of Thermoplastic Composite Materials 2009, doi:10.1177/0892705709096549
Add to CiteULike CiteULike   Add to Complore Complore   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us   Add to Digg Digg   Add to Reddit Reddit   Add to Technorati Technorati   Add to Twitter Twitter    What's this?